Concrete plant and equipment2019-06-04T22:52:21+00:00

Concrete Plant Division

KVM delivers lines for complete paving stone and block making equipment for every level of production, turnkey plants or single machines, including mixer plants for the concrete products. Equipment from updating existing plants to new setup of complete turnkey plants:

  • Block machines
  • Handling systems
  • Cubing and packing systems including buffer arrangement
  • Control system
  • Secondary processing machinery like splitting, tumbling, shot/sand blasting, washing, polishing etc.
  • Machinery for insulation blocks, ventilation bit dispenser, sand dosing etc.

Mostly KVM is known for designing customized solutions that correspond exactly to your need of capacity and production. It is not necessarily the most technical and advanced machine and solution that is the optimal for you, why KVM has more solutions to offer.

We take care of the project from start to the finish setup. KVM supplies plant layout and design, start-up assistance with in-plant operator training and after sales service and service contracts. Every design is based on KVMs experience, which is based on more than 60 years.

Large or small production capacities – KVM has the equipment!

Betonanlæg
Brochure
Concrete brochure
Brochure
Examples of concrete plants

Block machines

Blokstensmaskiner

KVM Block machines are based on almost 60 years of constant development and improvement. This produces a block machine that is simple to both operate and maintain. At the same time, it produces a variety of high-quality concrete products, i.e. paving stones, blocks, slabs, curb stones etc.

All KVM machines are connected to PC controllers with visualization systems, all developed through cooperation
between customers and KVM.

KVM’s block machines are equipped with one the markets heaviest frames, which have a 5-year guarantee.

KVM produces four series of block machines:

Series 750: Pallet size: 750 x 650 mm.
Series 900: Pallet size: 900 x 750 mm.
Series 1200: Pallet size from 1200 x 650 up to 1200 x 1000 mm.
Series 1500: Pallet size from 1400 x 750 up to 1500 x 1300 mm.

In addition to the series of block machines mentioned, KVM develops special machines, that fit the individual customer’s production pallet or for the production of special products. You are always welcome to call us to hear more.

For more information please contact our sales team.

Blokstensmaskiner
Series 750
Blokstensmaskiner serie 900
Series 900
Series 1200
Blokstensmaskiner serie 1500
Series 1500
Blokmaskine 1500 styring
Control

Handling systems

Håndteringssystemer

KVM produces complete handling systems, which consist of transport and buffer arrangement to and from curing areas. Furthermore KVM offers different curing solutions, i.e. Rack systems, Cassettes, Stillage etc.

Effective product management as well as integrated logistics between dry and wet side are crucial for achieving high unit cost benefits.

The handling systems include:

Forklift handling system, type TSC
Automatic handling system, type KFA
Automatic handling system with racks, type FC

The flexible constructions can be fitted into both new and existing buildings. They can be operated both manually and automatically and can handle both wet and dry sides.

For more information please contact our sales team.

TSC
Forklift Handling System (TSC)
KFA Handling System
Finger Car System
Finger Car System (FC)

Cubing Systems

Pallaterer

As standard, KVM produces two different types of cubing systems, the Ecoline 120 and the Speedline 140 systems. Both systems are characterised by long life, short cycle time, and great reliability.

KVM cubers are constructed for maximum versatility and can handle products from any block machine.

The heavy construction combined with well proven hydraulic and electronic control results in heavy and precise cubers requiring a minimum of maintenance.

For special concrete products, which need to be handled and packed with care, KVM offers robot solutions in many variations.

KVM also produces a manual cuber, which is often used on smaller machines and production facilities.

For more information please contact our sales team.

Brochure
Robot Cubing Systems
Brochure
Cubing Systems
Palletering
Palletering

Batching and mixing plants

KVM delivers concrete mixing plants to block machine plants. We design, project manage, produce and supply mixing plants. All from silo systems, cement, water and dosing equipment, mixer and skip hoist, colour dosing to concrete transport and control systems. With one combined control system we can control your mixing simultaneously with a block plant. This means one PC communication center for your entire production of concrete products. All from an intake of materials to the finished packed product ready for customers.

A KVM mixer plant is customized instead of a “standard-fits all”! We always take the starting point in your project and the preference of your mixer supplier. KVM offers more solutions, also a control system as a stand-alone solution for your mixer plant.

For more information please contact our sales team.

Blandeanlæg
Blandeanlæg
Blandeanlæg

Secondary processing

Efterbehandling

The market has increasing demands for products with refined surfaces – and KVM offers a wide range of equipment for after-treatment. The programme includes equipment for:

Tumbling
Splitting 
Polishing
Hammering
Washing 
Sand and shotblasting
Insulation blocks
Ventilation bit dispenser
Ventilation sand dosing

Data

Washing

Data

Tumbling

Data

Splitting

Data

Hammering

Data

Insulation blocks

Data

Ventilation bit dispenser

Data

Ventilation sand dosing

For more information please contact our sales team.

Control system – control of machines and plants

Styring

KVMs control system is based on more than 60 years of experience gained from development through co-operation between customers and KVM. The control system is programmed with the latest technology and is especially developed to optimize the survey and control of the operation of the entire block plant. The control can either be used for individual machines or for turnkey concrete plants. Via remote control in-house, programmers can log onto customers PC’s 24/7/365.

The control system is used as the communication center for the entire plant, all product settings are stored here and all reports are generated from this system. The system consists of screen pictures, flow diagrams and visualizations, which give the operator an optimal overview.

The control system is user friendly. There are help texts on screen pictures, which ensure a simple and reliable operation for the operator and a clear survey of the many possibilities this control offers.

For more information please contact our sales team.

Brochure
Brochure
Brochure
Productsheet
Styring
Styring
Palletering
LINKEDIN
24/7/365

Vi bruger cookies til statistik og til at forbedre brugeroplevelsen. Ved at benytte hjemmesiden accepterer du brugen af cookies. Læs mere her

Cookie indstillingerne på denne hjemmeside er aktiveret for at give dig den bedste oplevelse. Hvis du fortsætter med at bruge hjemmesiden uden at ændre dine cookie indstillinger eller du klikker Accepter herunder, betragtes dette som din accept

Luk